Micrometer for tubes. Specially designed for measuring the thickness of convex parts and tube walls. Body in steel. Serial number. Manufactured as per DIN 863. Supplied in case. Versions A/B/C/D/F upon equirement.
ART.0225 - THREE POINTS MICROMETER FOR INTERNAL MEASUREMENTS WITH VERNIER
Mechanical 3 points micrometer.
The instrument anvils are at the same level as the measuring head for measuring blind bores.
Personal judgement on the part of the operator is not required due to use of a torque limiter.
When the thimble rotates, the anvils are enlarged until they make contact with the bore walls.
The torque limiter ensures correct pressure so eliminating the requirement for operator judgement.
Manufactured to extremely strict tolerances.
Supplied in case with setting key and setting rings with “UKAS” certificates.
Size chart
Women's clothing size
| Size | XS | S | M | L |
|---|---|---|---|---|
| Euro | 32/34 | 36 | 38 | 40 |
| USA | 0/2 | 4 | 6 | 8 |
| Bust(in) | 31-32 | 33 | 34 | 36 |
| Bust(cm) | 80.5-82.5 | 84.5 | 87 | 92 |
| Waist(in) | 24-25 | 26 | 27 | 29 |
| Waist(cm) | 62.5-64.5 | 66.5 | 69 | 74 |
| Hips(in) | 34-35 | 36 | 37 | 39 |
| Hips(cm) | 87.5-89.5 | 91.5 | 94 | 99 |
How To Measure Your Bust
With your arms relaxed at your sides, measure around the fullest part of your chest.
How To Measure Your Waist
Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.
Reference:
ART.0225
Love0
Add to compare0
|
CODE
|
READING
(mm)
|
RANGE
(mm)
|
DEPTH
(mm)
|
ACCURACY
(mm)
|
WEIGHT
(Kg)
|
|
01
|
0,005
|
6÷8
|
58
|
0,004
|
|
|
02
|
0,005
|
8÷10
|
58
|
0,004
|
|
|
03
|
0,005
|
10÷12,5
|
58
|
0,004
|
|
|
04
|
0,005
|
12,5÷16
|
62
|
0,004
|
|
|
05
|
0,005
|
16÷20
|
62
|
0,004
|
|
|
06
|
0,005
|
20÷25
|
66
|
0,004
|
|
|
07
|
0,005
|
25÷35
|
66
|
0,004
|
|
|
08
|
0,005
|
35÷50
|
80
|
0,004
|
|
|
09
|
0,005
|
50÷65
|
80
|
0,005
|
|
|
10
|
0,005
|
65÷80
|
80
|
0,005
|
|
|
11
|
0,005
|
80÷100
|
100
|
0,005
|
|
|
12
|
0,005
|
100÷125
|
115
|
0,006
|
|
|
13
|
0,005
|
125÷150
|
115
|
0,006
|
|
|
14
|
0,005
|
150÷175
|
115
|
0,007
|
|
|
15
|
0,005
|
175÷200
|
115
|
0,007
|
|
|
16
|
0,005
|
200÷225
|
118
|
0,008
|
|
|
17
|
0,005
|
225÷250
|
118
|
0,008
|
|
|
18
|
0,005
|
250÷275
|
118
|
0,009
|
|
|
19
|
0,005
|
275÷300
|
118
|
0,009
|
|
|
20
|
0,005
|
SET 6÷10
|
0,003
|
||
|
21
|
0,005
|
SET 10÷20
|
0,003
|
||
|
22
|
0.005
|
SET 20÷50
|
0,004
|
||
|
23
|
0.005
|
SET 50÷100
|
0,005
|
20 other products in the same category:
Digital micrometer with disc measuring faces for external measurements. Water and dust protection IP54. Output RS 232. Absolute and relative measurements. mm/inch conversion. Manufactured as per DIN 863.
Wire holders with calibrated wires for measuring threads using the 3 wires method. Suitable for all micrometers with inserts Ø 6,5 mm.
Digital micrometer for internal measurements.Water and dust protection IP54.Output RS 232.Absolute and relative measurements.mm/inch conversion.Manufactured as per DIN 863.Supplied in case with setting key and setting...
Micrometer for external measurements with reduced contact surfaces. Suitable for measuring splined shafts or small surfaces. Frame in steel. Serial number. Manufactured as per DIN 863. Supplied in case. Complete with...
Indicator snap micrometer for measurements to 0,001 mm. Frame in steel. Contact surfaces in carbide. Hardened and ground screw for long-lasting reliability. Suitable for comparison measurements GO/NOGO microdisplay to...
Micrometer for internal measurements.Hardened and ground screw.Lapped contact surfaces.Serial number.Manufactured as per DIN 863/1.Complete with setting gauge.
Digital micrometer for checking side-mills. Water and dust protection IP54. Output RS 232. Absolute and relative measurements. mm/inch conversion. Contact surfaces in carbide. Manufactured as per DIN 863. Setting key...
Micrometer for large external measurements. Contact surfaces in carbide. Frame in steel. Supplied with interchangeable extensions and setting gauges. Workshop series. Serial number. Manufactured as per DIN 863....
Depth measurement micrometer with sturdy hardened and ground base.Interchangeable rods enable that reading does not have to be reset when changing rods.Serial number.Manufactured as per DIN 863/1.Supplied in case.
Digital micrometer with small measuring faces. Water and dust protection IP54 Output RS 232. Absolute and relative measurements. mm/inch conversion. Contact surfaces in carbide. Manufactured as per DIN 863. Setting...
Digital micrometer for depth measurement measurements.Water and dust protection IP54.Output RS 232.Absolute and relative measurements.mm/inch conversion.Interchangeable rods enable that reading does not have to be...
Digital micrometer for external measurements. Water and dust protection IP54.Output RS232. Absolute and relative measurements. Mm./inch conversion. Contact surfaces in carbide. Manufactured as per DIN 863. Supplied...
Digital micrometer for tubes. Water and dust protection IP54. Output RS232. Absolute and relative measurements. mm/inch conversion. Contact surfaces in carbide. Manufactured as per DIN 863. Setting key and setting gauge.
High quality/accuracy outside micrometer with discs. Casting painted arc heat-insulated. Sylvac digital electronic components complete with out-put OPTO RS232 (enable the direct connection to PC). ON/OFF function –...
Digital three points inside micrometer.BOWERS measuring heads with new generation SYLVAC SYSTEM electronic.Big display.From 6 to 300mm with 3 contact points in carbide.Sylvac electronic with output RS232C, 2 preset,...
High quality/accuracy outside micrometer. Casting painted arc heat insulated. Thimble (ø 18 mm) chromed and etched by laser for a clear and long lasting. Friction on the thimble and locking lever. Screw completely...
Micrometer for external measurements with contact surfaces in carbide. Steel frame. Heighest quality. Screw entirely hardened and ground for long-lasting reliability. Serial number. Manufactured as per DIN 863/1....
Modular beam, internal measurement micrometer for large dimensions.The set comprises a micrometric head range 13 mm and extension beam sections.Hardened and ground beams.Serial number.Manufacatured to precision:±...
Micrometer with blade contacts.Suitable for measuring the diameter of grooves and external grooves, with a resolution of 0.001mm or 0.00005".The head connot be rotated.
The micrometer has the following functions:...
English
Italiano 
![](http://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.bocchicontrol.it%2Fen%2Fmicrometers%2F156-art0150-micrometer-for-external-measurements-highest-quality.html&description=ART.0150 - MICROMETER FOR EXTERNAL MEASUREMENTS "HIGHEST QUALITY"&media=https://www.bocchicontrol.it/280-large_default/art0150-micrometer-for-external-measurements-highest-quality.jpg){kind=link}
